Table of Contents
Advertisement
Caution:
Never operate vibratory deck without filling the bag to 20% of the
weight of the bag. You could damage the equipment.
If equipment is equipped with a Vibrator deck, it is recommended
that ear protection be worn when operating this machine.
C. Maintenance of the Bag Seal Cuff and Gauge:
Periodic inspection of the bag seal cuff for dry rot cracks or tears and replace as necessary.
Replacement of the cuff is recommended if any wear, tears or thinning is noticed.
The pressure gauge for the bag seal cuff should be kept in good working order. If the
gauge does not read pressure, remove and replace it as soon as possible to prevent cuff
damage (0-30 PSI gauge recommended).
D. Adjusting the vibrators:
Remove end caps from each end of the vibratory motor. Loosen both nuts on both ends of
the vibratory motor and rotate the counter weights to the desire setting. Retighten nuts on
both ends and reinstall end caps.
34
Advertisement
Table of Contents
