CBE 510 Safety, Installation, Operation, Maintenance page 45

MAINTENANCE OF THE BAG SEAL CUFF AND GAUGE:
Periodic inspection of the bag seal cuff for cracks or tears is necessary. Replacement of the cuff
is recommended if any wear, tears or thinning is noticed.
The pressure gauge should for the bag seal cuff should be kept in good working order. If the
gauge does not read pressure, remove and replace it as soon as possible to prevent cuff
damage.
BULK BAG INFLATOR / EXHAUST SYSTEM

Check plungers once a year

Check and clean air filter once a month
Butterfly and Actuator

Check seat of butterfly once a year
45