Table of Contents
Advertisement
6.
Keep fingers, hands, feet, etc. out of path of pneumatically operated components.
7.
Safety glasses should be worn in equipment area.
8.
Follow the safety regulations for your plant. ALWAYS USE GOOD JUDGEMENT!
WITHIN THE TEXT OF THIS MANUAL:
"WARNING" indicates possible injury to personnel.
"CAUTION" indicates possible damage to equipment.
"NOTE" is an informational comment.
Before you begin production AND as you continue working daily with the machine, these points
should be observed for continuous service. Service parts such as belts, stuffing box material,
bearings, gears, fill spouts, etc. are available for replacement and stock supplies through Choice
GROUNDING RECOMMENDATIONS
ELECTRICAL NOISE CONSIDERATIONS
A major consideration in the installation of a successful system is the problem created by electrical noise. The
following paragraphs provide information to help the user avoid electrical noise problems. Though many
potential problems are presented, few, if any, will be encountered in an actual application using a suitably
installed PLC system, even in a relatively harsh industrial noise environment.
Bagging Equipment.
7
Advertisement
Table of Contents
