Subscribe to Our Youtube Channel
Related Manuals for CBE 250
Summary of Contents for CBE 250
- Page 1 Model 250 Rebagger Packer Safety - Installation - Operation - Maintenance TABLE OF CONMTENT 250 Rebagger Auger Packer 2014 1 OF 10...
-
Page 2: Table Of Contents
BEFORE OPERATING EQUIPMENT ------------------------------------------------------------------------------------- 6 WHEN OPERATING EQUIPMENT ---------------------------------------------------------------------------------------- 6 QUICK REFERENCE ---------------------------------------------------------------------------------------------------------- CHAPTER 1 OPERATION ---------------------------------------------------------------------------------------------------- 9 CHAPTER 2 MAINTENANCE ----------------------------------- ----------------------------------------------------------- 11 ILLUSTRATED PARTS FOR CBE MODEL 250 REBAGGERSERIES PACKER ---------------------------- 14 250 Rebagger Auger Packer 2014 2 OF 10... - Page 3 Sound engineering and design practices have been applied to minimize the possibility of accidents. However, while using equipment of this type, good judgment and extreme caution are necessary on the part of all personnel. If any clarification is required -- ASK US! 250 Rebagger Auger Packer 2014 3 OF 10...
-
Page 4: Warnings
Do not attempt to defeat any safety switches. Serious injury could result. While machine control power is on, do not activate limit switches manually. Serious injury and/or machine damage could result. Disable machine before attempting any maintenance or manual testing of components. 250 Rebagger Auger Packer 2014 4 OF 10... - Page 5 Follow the safety regulations for your plant. Always use good judgment. WITHIN THE TEXT OF THIS MANUAL: "WARNING" indicates possible injury to personnel; "CAUTION" indicates possible damage to equipment; "NOTE" is an informational comment. 250 Rebagger Auger Packer 2014 5 OF 10...
-
Page 6: Chapter 1 Operation
CHAPTER 1 OPERATION 250 Rebagger Auger Packer 2014 6 OF 10... - Page 7 NOTE: This machine does not have a scale therefore the weight is determined strictly by time an amount of material put in hopper at the beginning. WARNING: NEVER REMOVE INSIDE GRATE WORK WITH POWER ON AND OR OPERATE MACHINE WITH GRATE OUT. 250 Rebagger Auger Packer 2014 7 OF 10...
-
Page 8: Chapter 2 Maintenance
CHAPTER 2 MAINTENANCE Periodically check the belt tension and adjust as required. (SEE BELOW) using all threaded bolts. 250 Rebagger Auger Packer 2014 8 OF 10... - Page 9 Lubrication – periodically grease bearings 1 or 2 shots. NOTE: Make sure motor plate is raised evenly by measuring and maintaining the same distance on each corner. 250 Rebagger Auger Packer 2014 9 OF 10...
- Page 10 ILLUSTRATED PARTS See attached parts pages specific To your Equipment 250 Rebagger Auger Packer 2014 10 OF 10...
Need help?
Do you have a question about the 250 and is the answer not in the manual?
Questions and answers