Table of Contents
Advertisement
The CBE 510 Bulk Bag Filler is comprised of the following assemblies:
1. Digital Filler Controller
(104-1050)
2. Solenoid/ Pneumatic
Assembly (CBE-105----)
NOTE: App Specific
3. Start / Stop / E-Stop
Push Button Control
Station (115-900)
4. Dust Tight 12" Fill
Head w/ Slide-Gate Inlet
(CBE-502----)
NOTE App Specific
The digital filler controller controls all aspects of the bag filling cycle. It is directly
responsible for controlling the solenoid valves and cylinder operated functions of the
machine.
The solenoids or pneumatic valve control the air operated functions of the machine. A
configuration of three to six solenoid are located in the typical solenoid control panel.
Allows for Manual Start, Stop, Pause and Emergency Shut Down of the Machine.
12" ID Bulk Bag Fill Head with Inflatable Bag Seal Cuff Designed to Inflate and Seal
Against the Inside of the Bulk Bag Neck to Prevent Displaced Air from Escaping the Bag
During the Bag Filling Process. A Slide-Gate Valve Starts and Stops the Flow of Product
into the Bag.
26
Advertisement
Table of Contents
