Installing A Storage Enclosure Basic Hard Disk Drive - Western Digital ActiveScale X100 Support Manual

ActiveScale™ X100 Support Guide
6. Press the two buttons on the hard drive carrier.
7. Remove the drive.
Figure 3-77. HDD buttons
Figure 3-78. Removing a hard disk drive
Note: If the supercap discharges and can no longer power the LEDs, the LED
state will be saved in non-volatile memory so that when the enclosure is booted,
the administrator will still be able to identify the enclosure and component in
question.

3.6.5.2 Installing a Storage Enclosure Basic hard disk drive

To install a replacement HDD:
92