Hard Disk Drive Specifications - Western Digital ActiveScale X100 Support Manual

ActiveScale™ X100 Support Guide
Condition (fully configured)
Thermal output
Weight
1.Values are for one additional node. System Expansion Node kits can contain up to three additional nodes.
2.Rackless system height can vary based on the installation. A rackless configuration uses 36U of equipment.
3.The minimum system weight does not include the rack and PDUs
B.2 Hard disk drive specifications
The following tables list the specifications for the Western Digital Corporation qualified hard disk drives
contained within the System Nodes, Storage Nodes, and Storage Enclosure Basics
Table B-17. 1 TB hard disk drive specification summary
Condition
Model
Capacity
Dimensions
Hot swappable?
Operating relative humidity
Operating temperature
Quantity (per system)
Replacement part number
Type
1.Only hot swappable after decommissioning.
Table B-18. 10 TB hard disk drive specification summary
Condition
Model
Capacity
Non-operating
N/A
• Minimum system weight
• Full system weight—2227 lbs (1010 kg)
• Delivery weight (system and packaging)—2457 lbs (1114 kg)
Western Digital Corporation
1 TB
• Width—2.75 in (70 mm)
• Depth—3.93 in (100 mm)
• Height—.37 in (9.5 mm)
1
Yes
5% to 95%, non-condensing
0°C to 70°C (32°F to 158°F) internal
• Four per System Node
• Four per Storage Node
1EX0222
SATA
Western Digital Corporation
10 TB
234
Operating
Partial configuration (one column of
populated sleds):
• 8.53/11.26 KBTU/h
Full configuration (seven columns of
populated sleds):
• 21.83/ 25.25 KBTU/h
System Expansion Node kit:
• 0.665 to 0.785 KBTU/hour
3
—1572 lbs (713 kg)
Specification
Travelstar 7K1000
®
Specification
Ultrastar He10
®
1