Installing A Storage Enclosure Basic I/O Module - Western Digital ActiveScale X100 Support Manual

ActiveScale™ X100 Support Guide
Tip: Take note of which port miniSAS cable came from which port to ensure that
they are plugged in correctly when reassembling.
5. While supporting the I/O module from the bottom, pull the latch handle towards you.
Warning: The I/O module is bottom-heavy. Continue supporting the module
from the bottom during the rest of the removal procedure.
Figure 3-57. Unlocking the I/O module
6. Remove the I/O module from the chassis.
Figure 3-58. Removing the I/O module

3.6.1.2 Installing a Storage Enclosure Basic I/O module

To install a replacement I/O module:
80