Maintenance
Headlight adjustment
Proceed as follows:
1. Position the vehicle in running order and with
the tyres inflated to the prescribed pressure, onto
a flat surface 10 m away from a half-lit white
screen; ensure that the longitudinal axis of the ve-
hicle is perpendicular to the screen;
2. Turn on the headlight and check that the boun-
dary of the light beam projected onto the screen is
not higher than 9/10 or lower than 7/10 of the dis-
tance between the centre of the headlight and the
ground;
3. Otherwise, adjust the right headlight with screw
«A».
N.B.
THE ABOVE PROCEDURE COMPLIES WITH THE EURO-
PEAN STANDARDS REGARDING MAXIMUM AND MINI-
MUM HEIGHT OF LIGHT BEAMS. REFER TO THE STATU-
TORY REGULATIONS IN FORCE IN EVERY COUNTRY
WHERE THE VEHICLE IS USED.
MAIN - 52
Vespa GTS Super 125 i.e.