VESPA GTS Super 125 i.e. Service Station Manual page 91

Vespa GTS Super 125 i.e.
Electrical system
THE FOLLOWING INFORMATION REFER TO THE VERSION EQUIPPED WITH MIU G3 ECU.
KEY
1. Battery
2. Fuse No. 1
3. Fuse No. 5
4. Ignition switch contacts
5. Fuse No. 4
6. Fuse No. 7
7. Electronic control unit
8. Daylight running light bulbs and license plate light
9. High/low beam two-light bulb
10. Light switch
11. Headlight relay
WARNING
ALL CONTINUITY TESTS MUST BE CARRIED OUT WITH THE CORRESPONDING CONNECTORS
DISCONNECTED.
DAYLIGHT RUNNING LIGHT AND LICENSE PLATE LIGHT LINE
1) Check that bulbs operate properly.
2) Check fuses No. 1 and 7.
3) Check ignition switch contacts.
4) Check if there is voltage between the Yellow-Black cable of fuse No. 7 and the ground. If not, check
cable harnesses.
ELE SYS - 91