VESPA GTS Super 125 i.e. Service Station Manual page 212

Braking system
- Check that the pistons and their seats show no
scratches.
- Wash and blow all the components carefully
- Fit the O-rings and new dust guards
- Refit the pistons in their seats being careful to
lubricate with brake fluid
- Re-couple the half callipers and lock the two
screws at the specified torque
Locking torques (N*m)
Calliper coupling screw
Refitting
- Follow the removal steps but in reverse order and tighten to the prescribed torque.
Locking torques (N*m)
Calliper fixing screw 24 ÷ 27
If the calliper is replaced:
CAUTION
ONCE REFITTING IS FINISHED, BLEED THE SYSTEM.
CAUTION
ALWAYS USE NEW COPPER WASHERS.
Locking torques (N*m)
Screw fixing the oil connection to the calliper 19 ÷ 24
BRAK SYS - 212
30 ÷ 33 Nm
Vespa GTS Super 125 i.e.