VESPA GTS Super 125 i.e. Service Station Manual page 120

Engine from vehicle
- Remove the four retainers of the rear brake pipes
from the crankcase.
- Remove the rear shock absorbers.
- Remove the engine-swinging arm fixing pin by
undoing the nut and operating on the head of the
pin as shown in the photograph.
- The engine is now free.
Upon refitting the engine to the vehicle, carry out
the removal operations but in reverse order, and
respect the tightening torque shown in the «Spec-
ifications» Chapter.
- Check that there is a small clearance when the
valve is in abutment against the set screw.
- Check the engine oil level and if necessary, top
it up with the recommended type.
- Fill and bleed the cooling circuit.
- Check accelerator and electric devices for correct
functioning.
ENG VE - 120
Vespa GTS Super 125 i.e.