VESPA GTS Super 125 i.e. Service Station Manual page 205

Vespa GTS Super 125 i.e.
Suspensions
Length of the swinging arm tube on the chas-
sis side:
283 ± 0.1 mm
- Lubricate roller casings and the plastic bushings
with grease
- Insert the spacers
- Assemble the two arms with the relative bolt in
the position shown in the picture
- Adjust the bolt as shown in the picture
- Position the chassis side swinging arm with the
most protruding part pointing towards the silent
block side as shown in the picture
Recommended products
AGIP GREASE PV2 Ivory smooth-textured,
slightly-stringy anhydrous calcium-base
grease.
TL 9150 066, NATO G 460 symbol
- Make sure the silent bloc is not broken. If it is,
replace the coupling.
- Remove the Seeger ring shown in the picture
- Remove the full silent bloc bracket
- Undo the silent bloc ring shown in the picture
SUSP - 205