Vespa GTS Super 125 i.e.
Questa sezione descrive le operazioni da effettuare per lo smontaggio del motore dal veicolo.
Exhaust assy. Removal
- Remove the right and left fairings and the spoiler terminals.
- Remove the Lambda probe from its support and disconnect it.
Remove the clamp holding the lambda probe ca-
ble to the coolant pipe indicated in the photograph
- Undo the two exhaust manifold fixings on the
head. To unscrew the nuts that fix the silencer
flange to the head properly, use a jointed wrench
that allows, according to the travel direction, to get
also at the right nut. That is difficult to do with a
traditional straight wrench.
- Undo the three screws that fix the silencer to the
supporting arm.
- Remove the full silencer unit.
Engine from vehicle
ENG VE - 115