VESPA GTS Super 125 i.e. Service Station Manual page 234

Chassis
- Remove the electric saddle opening switch, the
fuse box and the manual saddle opening cable as
shown in the photograph
Taillight assy.
- Operate the screw indicated in the figure to re-
move the rear turn indicator
Remove screw «A» to remove the rear headlight
assembly.
Access to taillight bulbs, stop light bulb and license
plate bulb.
To reassemble, repeat the operation but in reverse
order.
N.B.
IF MISTING IS NOTICED ON THE INSIDE OF THE HEAD-
LAMP GLASS, THIS DOES NOT INDICATE A FAULT AND
IS ATTRIBUTABLE TO HUMIDITY AND/OR TO LOW TEM-
PERATURES.
THE PHENOMENON SHOULD QUICKLY DISAPPEAR
WHEN THE LIGHT IS SWITCHED ON.
THE PRESENCE OF DROPS OF WATER, ON THE OTHER
HAND, COULD INDICATE THAT WATER IS INFILTRATING.
CONTACT THE AFTER-SALES SERVICE NETWORK.
CHAS - 234
Vespa GTS Super 125 i.e.