VESPA GTS Super 125 i.e. Service Station Manual page 99

Vespa GTS Super 125 i.e.
Electrical system
ELECTRONIC CONTROL UNIT CONNECTOR
1. Injection telltale light (Brown-Black)
2. Not connected
3. Not connected
4. Lambda probe negative terminal (White-Green)
5. Live supply (Red-White)
6. Battery powered (Grey-Black)
7. Immobilizer Aerial (Orange-White)
8. Electric fan remote control (Blue-Yellow)
9. Water temperature sensor (Sky blue-Green)
10. Not connected
11. Lambda probe positive (Sky blue-Black)
12. Engine stop switch (Green-Black)
13. Engine rpm sensor positive (Red)
14. Injector (Red-Yellow)
15. Engine rpm sensor negative (Brown)
16. Diagnosis (Purple-White)
17. Immobilizer warning light (Red-Green)
18. To ground (Grey-Green)
19. Low-beam lights automatic ignition (White-
Black)
20. Injection load remote control (Black-Purple)
21. Not connected
22. HV coil (Pink-Black)
23. Not connected
24. Start-up enabling (Orange-Blue)
25. Not connected
26. Ground lead (Black)
ENGINE TEMPERATURE SENSOR CONNEC-
TOR
1. Ground lead (Grey-Green)
2. Instrument panel (Grey-Black)
3. Electronic control unit (Sky blue - Green)
4. Ground lead (Black)
ELE SYS - 99