English - Festo HSP-AE-IO Series Brief Overview

1 User
The handling modules of type HSx−AE
(= HSP−AE−..., HSW−AE−...) are intended for automated
equipment in the field of handling and assembly technology.
The attached motor unit of type MTR−DCI−H M−... is a
servo motor with integrated control electronics.
The higher−order PLC/IPC is connected via the control
interface (type HSx−AE−IO: digital inputs/outputs).
Commissioning and parameterisation is performed:
With the FCT software package and the MTR−DCI−H M
plug−in via the RS232 interface.
Optionally with the control panel (display, 4 control
keys).
The pick and place standard sequences can be parameter
ised in teach mode (HSx mode).
Note
This brief overview is part of the operator package of
type P.BP−HSP_HSW−AE. It serves only as initial in
formation and does not replace the complete docu
mentation, which is included as a PDF file on the CD
ROM supplied.
S Observe the information and safety instructions in
the complete description of the handling module
unconditionally.
S Please consult your local Festo service or write to the
following e−mail address if you have any technical
requirements: service_international@festo.com
Festo P.BE−K−HSP_HSW−AE 0710a English
instructionsEnglish
15