English - Festo CPV DI02 Series Brief Description

1 User
The CPV valve terminal with field bus direct connection
(CPV Direct) is intended exclusively for use as a slave on
the PROFIBUS−DP field bus (as per EN 50170) in industrial
applications.
The maximum values specified in the section Technical
specifications" must be observed here. Detailed information
can be found in the Pneumatics manual P.BE−CPV−DI02−...
Warning
S Switch off the power supply before connecting or
disconnecting plugs (otherwise this could lead to
functional damage).
S Use only power units which guarantee reliable
electrical isolation of the operating voltage as per
IEC/DIN EN 60204−1. Observe also the general
requirements for PELV power circuits as per IEC/DIN
EN 60204−1.
S Connect an earth conductor of sufficient diameter to
the connection marked with the earth symbol.
Festo CPV...−GE−DI02−8 0704NH English
instructionsEnglish
13