Extension Table - Craftex CT201 Owner's Manual

Installing the Extension Table
T ake the extension table and locate the
holes for the cap screws on the in-feed
table. Attach the extension table to the
in-feed table finger tightening the cap
screws. (See Figure 3)
Figure 3: Finger tighten the cap screws
Now, you need a straight edge to adjust
the extension table surface to the in-feed
table. Place the straight edge on the
table and adjust the level of the table.
Once the table is completely leveled,
tighten all the cap screws. (See Figure 4)
Figure 4: Using straight edge leveling the
table
ASSEMBLY
In stalling the Fence
T o install the fence first you have to
install the fence carriage to the table
stand using wa
(f inger tighten). See Figure 5
Figure 5: Installing the fence carriage
Now, take the fence out of the packaging
and attach to the carriage. Use the two
washers and cap screws provided, and
tighten the fence to the carriage. (See
Figure 6)
F igure 6: Attaching fence to the carriage
shers and cap screws
11