Updating System Software - ADC MM701F User Manual

U S
PDATING
You can upgrade the firmware on your MM701F. To upgrade, you must specify the IP address
of the server where the new firmware is stored.
1 Configure a TFTP server to download the system software. The MM701F uses TFTP to
download the firmware which comprises a configuration file (must be named "celsiancfg")
and an image file (must be named "image") located on the TFTP server.
2 From the Main Menu
3 Type to select
1
system software.
4 Type 2 to select
•
Configuration
•
Image to download the image file "image"
5 Select Update
MM701F User Manual
S
YSTEM OFTWARE
, select System Update
System Update
1. IP Address
2. File to update
3. Update
. Configure the IP address of the TFTP server to download the
IP Address
File to update . Select the type of file to download.
to download the configuration file "celsiancfg"
to begin updating the software.
Chapter 4: Managing the Modem Using the Console Port & Telnet
to access the System Update
10.0.0.2
CONFIGURATION
Select (Return to exit) ->
page.
61