ADC MM701F User Manual page 32

Configuring the WAN
Parameter
Login Name
Login Password
Authentication
4 Do one of the following:
•
Click Apply
•
Click Reset
have made changes and Apply has been selected.
•
Click Delete
Changes" on page
26
Description
A PPP session requires a Login Name that is supplied by the service provider.
A PPP session requires a Login Password that is supplied by the service provider.
Select the authentication protocol provided by your service provider for PPP
sessions. The authentication protocol type must match at the MM701F and the
service provider. The options are:
• PAP—The modem sends authentication requests to the service provider and
authentication occurs only once during the life of the link.
• CHAP—The service provider returns an authentication challenge to the modem
during the authentication.
then save changes as described in
to undo the changes you made to the screen. Reset will not work after you
to remove the session, then save changes as described in
39.
"Saving Changes" on page
MM701F User Manual
39.
"Saving