Update System Software - ADC MM701F User Manual

Update System Software

You can upgrade the software on your MM701F. To upgrade, you must specify the IP address
of the server where the new software is stored. The MM701F uses TFTP to download the
software which comprises a configuration file (must be named "celsiancfg") and an image file
(must be named "image").
The software update process takes about 90 seconds to complete. After the
update the modem resets itself. Do not recycle the power during this process.
This will cause permanent image corruption.
1 Click System
2 Enter the IP Address
3 From Select file to update,
•
select Configuration
• select
Image
4 Click Download
MM701F User Manual
on the menu bar, then
of the server where the firmware image or configuration file is located
do one of the following:
to download the configuration file "celsiancfg"
to download the image file "image"
to start the file download.
Chapter 3: Managing the Modem Using a Web Browser
System Update to access the System Update page.
.
21