Setting Up The Wan - ADC MM701F User Manual

S U
ETTING P THE
For Bridge or Router mode you need to set the WAN VPI/VCI as supplied by your service
provider.
1 From the Main Menu
.
Session group 1 - 16
1. Session 1
2. Session 2
3. Session 3
4. Session 4
5. Session 5
6. Session 6
7. Session 7
8. Session 8
9. Session 9
10. Session 10
11. Session 11
12. Session 12
13. Session 13
14. Session 14
15. Session 15
16. Session 16
17. Get next group
The WAN Session screen presents data related to each session defined for your Bridge/Router.
The following table provides a description of the four fields displayed on the WAN Session
screen.
Column
1
2
3
4
MM701F User Manual
WAN
, select WAN Setup
Select session for editing (Return to exit) ->
Description
The session number—Sessions 1-16 are displayed on the first page of the
screen and sessions 17-31 are displayed on a the second page of the WAN
session screen.
Session name—Up to 15 characters may be entered for a descriptive
name for a session. No spaces are allowed. Use this field to help identify
each of your sessions.
Session protocol—configured for this session.
Session status indicator—enabled or disabled.
Chapter 4: Managing the Modem Using the Console Port & Telnet
. The WAN Session screen displays.
Bridge RFC1483 Bridge
IPoA-Router RFC1483 Router
PPP-Router PPPoA
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
(Enabled)
(Enabled)
(Enabled)
45