ADC MM701F User Manual page 25

Set Spanning Tree
Spanning Tree eliminates loops in a LAN topology, ensuring that there is only one path (or link)
between any two nodes on a network. Use Spanning Tree protocol only when you have already
selected a Bridge session (as described in
LAN has more than one device (a PC only) on your LAN and those devices have more than one
physical path connecting them.
1 Select System
page .
2 Select Enable
MM701F User Manual
on the menu bar then click
to activate the Spanning Tree protocol for all bridging sessions.
Chapter 3: Managing the Modem Using a Web Browser
"Set Up WAN Sessions" on page
Configuration to access the
23) and when your
System Configuration
19