ADC MM701F User Manual page 39

2 Configure the following parameters as supplied by your service provider:
Parameter
ADSL Standard for physical
layer interface
Trellis Encoding
Bin Overlap Mode
Transmit Power Attenuation
Coding Gain
Maximum Bits per Bin
Transmit Start Bin
Transmit End Bin
Receive Start Bin
Receive End Bin
Maximum Downstream Rate
SNR Margin Limit
3 Click then save changes using
Apply
MM701F User Manual
Chapter 3: Managing the Modem Using a Web Browser
Description
Select from the options:
• ITU G.992.2 G.lite
• ITU G.992.1 G.DMT (default)
• ANSI T1.413 Issue 2
• Multimode
Enable or Disable (default) Trellis Encoding. Trellis Encoding allows
for high data speeds and reduces transmission errors.
Select either FDM (default) or EchoCancellation.
Select a value from 0 to 12 decibels (0 is the default).
Select either Auto (default) or a value from 0 to 7 decibels.
Select a value from 2 to 15 (14 is the default).
Select a value from 6 to 31 (6 is the default).
Select a value from 6 to 31 (31 is the default).
Select a value from 6 to 255 (32 is the default).
Select a value from 6 to 255 (255 is the default).
Select a value from 32k to 12000k (12,000 is the default).
Select a value from -64 to 63 (4 is the default).
"Saving Changes" on page 39.
33