Saving Changes - ADC MM701F User Manual

S C
AVING HANGES
Use the Save Changes
immediately writes all current system configuration to permanent memory (NVRAM). You
cannot selectively write configuration to NVRAM. When you issue the save command, all
current configuration is written to NVRAM.
1 Select Save Changes
2 Do one of the following:
•
Click Save
•
Click Cancel
MM701F User Manual
page for saving your current configuration to flash memory. This option
on the menu bar to access the
to write the configuration to flash memory.
to exit the current page without saving your configuration.
Chapter 3: Managing the Modem Using a Web Browser
Save Changes page.
39