Set To Factory Defaults - ADC MM701F User Manual

Managing the System

Set to Factory Defaults

When you configure the MM701F, you change the factory default settings to new values. You
can return these parameters to their default values to provide a known starting point if you are
troubleshooting or you simply want to configure new parameters. For session default values, see
"Default Session Parameter Values" on page
Active links are lost when you reset to factory default values.
1 Click System
2 Click Proceed
3 Click Cancel
22
on the menu bar then Factory Defaults
if you want to return all values to their original factory values.
if you do not want to return all values to their original factory values.
70.
to access the System Factory Defaults page.
MM701F User Manual