Table of Contents
Advertisement
Setting Up a Telnet Session
S
U
ETTING
P A
Make sure your PC is on the same IP subnet as the modem as described in
on page
10. To set up a telnet session, specify the LAN IP address of the modem to establish
communication. The default LAN IP address is 10.0.0.1. If this IP address has changed, contact
your network administrator.
You cannot manage the modem through the console port and a telnet session
at the same time.
Below is an example using the telnet application in Microsoft Windows 98:
1
Click
Start
,
Run
2
In the
Open
box, enter the telnet command and IP address (for example: 10.0.0.1) then click
OK
to start the Windows telnet client and access the password prompt. Enter the telnet
password to access the
password
.
44
T
S
ELNET
to access the
Run
dialog.
Main Menu
page. The default telnet password for the MM701F is
ESSION
"Setting Up the PC"
MM701F User Manual
Advertisement
Table of Contents
