ANT130LZS Hardware Manual
Chapter 4: Maintenance
N O T E : The bearing area must be kept free of foreign matter and moisture; otherwise, the performance
and life expectancy of the stage will be reduced.
D A N G E R : To minimize the possibility of bodily injury or death, disconnect all electrical
power prior to performing any maintenance or making adjustments to the equipment.
4.1. Service and Inspection Schedule
Inspect the ANT130LZS once per month. A longer or shorter inspection interval may be required depending
on the specific application, and conditions such as the duty cycle, speed, and environment.
Monthly inspections should include but not be limited to:
Visually inspect the stage and cables.
l
Re-tighten loose connectors.
l
Replace or repair damaged cables.
l
Clean the ANT130LZS and any components and cables as needed.
l
Repair any damage before operating the ANT130LZS.
l
Inspect and perform an operational check on all safeguards and protective devices.
l
www.aerotech.com
Chapter 4
Maintenance
37