Christie DWU851 Service Manual page 61

DWU851(DD1-WU70P/71P) / DHD851(DD1-HD70P/71P) / DWX851(DD1-WX70P/71P)
ENGINE (left) side of the MAIN PCB
Wire the cables in the area surrounded with orange dotted line according to
CNDCR, CNLAD, CNSTR and IRIS UNIT cable.
CNLAD, CNSTR, IRIS UNIT cable and CNDCR.
CNLAD in here, under the PCB.
CNCS2 at the wire clamp.
LAMP2 UP FAN cable, CNCS2.
CNDMC
LAMP2 UP
FAN cable
DWU851/DHD851/DWX851
Service Manual
020-000755-01 Rev. 1 (11-2014)
Pass CNCS2 along
the LAMP2 UP FAN.
LAMP2 UP FAN
CNCS2
Wire clamp
Wind CNLAD around CNSTR two and a half times in counter-
clockwise before connecting them to the MAIN PCB.
CNDMC in here.
Connect CNDMC.
60
following procedure.
CNSTR
CNLAD
Connect LAMP2
DOWN FAN cable.