Christie DWU851 Service Manual page 43

DWU851(DD1-WU70P/71P) / DHD851(DD1-HD70P/71P) / DWX851(DD1-WX70P/71P)
BASIC FREQ.
Switches the basic vertical frequency for the output image of this projector.
50Hz
SERIAL # CLEAR
NETWORK RESET
SOFT RESET
When this is executed, all of the user data is initialized. Never use it if not required.
6-14 RUN TIME window
The product operating time display method (accumulated lamp time display method)
1. Open the ADVANCED MENU and select SETUP - LAMP & FILTER - LAMP-1 HOURS or LAMP-2
HOURS, and then press the
2. Press the RESET button once, then press KEYSTONE button of the remote control for 3 sec-
onds or more to display the screen shown below. The menu will close after 10 seconds if there
are no further operations.
3. Use to select the usage status number. (The usage status is as shown below.)
RUN-1 TIME window
6-15 COLOR BOOST window
Select the COLOR BOOST mode
1. Open the ADVANCED MENU and select IMAGE SETTINGS - COLOR WHEEL, and then press
the or ENTER button to display the COLOR WHEEL box.
2. While BRIGHT is highlighted, press the RESET button twice and then press RESET button of
the remote control for 3 seconds or more to display the screen shown below. The menu will close
after 10 seconds if there are no further operations.
3. Use to select the COLOR BOOST mode. (Default : ON)
DWU851/DHD851/DWX851
Service Manual
020-000755-01 Rev. 1 (11-2014)
60Hz (NTSC region)
, ENTER or RESET button to display the LAMP TIME reset box.
0 ..... Total usage status
1 ..... Current usage status
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
COLOR BOOST window
42