Christie DWU851 Service Manual page 59

DWU851(DD1-WU70P/71P) / DHD851(DD1-HD70P/71P) / DWX851(DD1-WX70P/71P)
After attaching the MAIN PCB block
Connect and wire all the cables to be connected to the MAIN PCB as below. The cables with pale
blue frame and pointing arrow are from ENGINE assembly.
Refer to each section for the detail of wiring procedure.
Lens shift_H motor cable
Lens shift_V motor cable
CNLAD (to ADAPTER PCB)
CNSTR
(to SHUTTER UNIT)
IRIS UNIT cable
CNDCR (to DC RELAY PCB)
CNHS
(to humidity sensor)
LAMP2 UP FAN cable
LAMP2 DOWN FAN cable
Temperature sensor cable
CNCWC
(to CW SW/INDEX PCB)
CNDML (to DMD PCB)
CNDMC (to DMD PCB)
CNCS2 (to LAMP2 SW. PCB)
CNCS1 (to LAMP1 SW. PCB)
CNLDD (to LAMP DOOR RELAY PCB)
DWU851/DHD851/DWX851
Service Manual
020-000755-01 Rev. 1 (11-2014)
CNSSH (to SHIFT SW.-H PCB)
CNNWP (to BATTERY PCB)
POWER EXHAUST FAN cable
CNPW1 (to POWER UNIT1 CIRCUIT)
CNAWD (to AC WATCH PCB)
CNRCR (to REMOTE-R PCB)
CNLED CNACR
(to LED PCB) (to POWER UNIT COOLING)
POWER INTAKE FAN cable
CNLCD (to SUB LCD PCB)
CNKEY (to KEYPAD PCB)
CNRCR (to REMOTE-R PCB)
CNPW2 (to POWER UNIT2 CIRCUIT)
58
CNGD1