Worktop Cut-Out - Flush-Fit - Miele SmartLine CS 7611 Operating And Installation Instructions

Installation
Worktop cut-out – flush-fit
5,5
+0,5 *
Natural stone worktop
+ 0.5
* 7 mm with CS 7611 FL
Information for calculating the cut-out
The appliances overlap the stepped cut-out by 10 mm.
When installing several appliances, a distance of 2 mm must be observed between
the individual appliances.
Calculating cut-out dimension A
1 appliance = width of the appliance plus 2 mm on the right, plus 2 mm on the left.
Several appliances = total width of the appliances plus 2 mm distance between
the appliances, plus 2 mm on the right, plus 2 mm on the left
Calculating cut-out dimension B = cut-out dimension A minus 12 mm on the right,
minus 12 mm on the left.
Some examples are illustrated below.
60
ß R 4
0 2
12
B
A
A
B
5,5
+0,5 *
12
Wooden worktop
0 2
B
A