Download Table of Contents Print this page
Miele ProLine CS 1018 G Operating And Installation Instructions

Miele ProLine CS 1018 G Operating And Installation Instructions

Gas wok


Quick Links

Operating and installation
ProLine Gas wok
To avoid the risk of accidents or damage to the appliance it is
essential to read these instructions before it is installed and used for
the first time.
en-SG, ZA
M.-Nr. 10 829 920


Table of Contents

Summary of Contents for Miele ProLine CS 1018 G

  • Page 1 Operating and installation instructions ProLine Gas wok To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-SG, ZA M.-Nr. 10 829 920...
  • Page 2 For trouble-free operation of the appliance, it is best to use it in the countries specified for use. For use in other countries, please contact Miele in your country.
  • Page 3 Gas-heated appliances Safety precautions to take if you smell gas  Turn off the gas emergency control valve immediately. This is usually located near the gas meter.  Eliminate all sources of ignition in a safe manner. Do not smoke, light cigarette lighters or matches. ...
  • Page 4: Table Of Contents

    Contents Warning and Safety instructions..............Caring for the environment ................16 Guide to the appliance ..................17 Wok ........................17 Rotary controls ....................18 Burner........................19 Accessories supplied ..................20 Before using for the first time ................21 Cleaning the ProLine element for the first time ........... 21 Switching on the ProLine element for the first time ..........
  • Page 5 Contents Installation notes ....................42 Building-in dimensions ..................43 Worktop cut-out for several ProLine elements............ 44 Installation ......................46 Gas connection ....................50 Burner ratings ...................... 53 Electrical connection ................... 54 Converting to another gas type ............... 55 Jet table....................... 55 Changing the jets ....................
  • Page 6: Warning And Safety Instructions

    They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep these instructions in a safe place and ensure that new users...
  • Page 7 Warning and Safety instructions Correct application  This wok is designed for domestic use and for use in similar environments.  This wok is not intended for outdoor use.  This wok is intended for domestic use only to cook food and keep it warm.
  • Page 8 Warning and Safety instructions Safety with children  Children under 8 years of age must be kept away from the wok unless they are constantly supervised.  Children aged 8 and older may only use the wok without supervision if they have been shown how to use it in a safe manner. Children must be able to understand and recognise the possible dangers caused by incorrect operation.
  • Page 9  Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician.  Damage to the wok can compromise your safety. Check the wok for visible signs of damage. Do not use a damaged wok.
  • Page 10 Miele authorised service technician. Otherwise the warranty is invalidated.  Miele can only guarantee the safety of the appliance when genuine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts.
  • Page 11  Danger of electric shock! Do not use the hob if it is faulty. Shut off the gas supply and contact Miele.  If the wok is built in behind a furniture front (e.g. a door), do not close the door while the wok is in use. Heat and moisture can build up behind the closed door.
  • Page 12 Warning and Safety instructions Correct use  The wok gets hot when in use and remains hot for some time after being switched off. Do not touch the appliance if there is a possibility that it could still be hot. ...
  • Page 13 If the pan diameter is too large, flames can spread out to the sides and damage or burn the worktop, wall claddings or surrounding units and also parts of the hob. Miele cannot be held liable for this type of damage.
  • Page 14 Warning and Safety instructions  Do not use pans with very thin bases on this hob, and never heat up empty pans as they could get damaged. This could also damage the appliance.  The pan support supplied with the appliance must always be used.
  • Page 15 Do not use a steam cleaning appliance to clean this wok. The steam could reach electrical components and cause a short circuit.  Miele will guarantee to supply functional spare parts for a minimum of 10 years and up to 15 years following the discontinuation of your ProLine element.
  • Page 16: Caring For The Environment

    Your Miele dealer will take the packaging material away. Please dispose of it at your local community waste collection / recycling...
  • Page 17: Guide To The Appliance

    Guide to the appliance a Wok burner b Trivet c Rotary control...
  • Page 18: Rotary Controls

    Guide to the appliance Rotary controls a  Burner off The gas supply is turned off b  Ignition position c  Strongest flame The outer and inner burners are on the highest setting d  Strong flame The outer burner is on the lowest setting, the inner burner on the highest setting e  Weak flame The outer burner is off, the inner burner is on the highest setting f  Weakest flame...
  • Page 19: Burner

    Guide to the appliance Burner a Inner burner cap b Outer burner cap c Burner ring d Burner head e Thermocouple f Ignition electrode g Burner base...
  • Page 20: Accessories Supplied

    Guide to the appliance Accessories supplied The accessories supplied with your appliance as well as a range of optional ones are available to order from Miele (see “Optional accessories”). Wok ring The wok ring supplied gives additional stability to the wok, especially to woks with a rounded base.
  • Page 21: Before Using For The First Time

    Before using for the first time  Please stick the extra data plate for Switching on the ProLine the appliance supplied with this element for the first time documentation in the space provided The metal components have a in the “After sales service” section of protective coating.
  • Page 22: Pans

    Pans - Always place the cookware on the Minimum cookware base diameter trivet supplied. Do not place [cm] cookware directly on the burners. Pots/pans - Place the cookware on the trivet in such a way that it cannot tip over. A Maximum diameter at top of little movement is quite normal and cookware [cm]...
  • Page 23 Pans Wok ring Combination trivet  Use the wok ring supplied to give The combination trivet must be used if additional stability to pans, especially you wish to use a pan with a smaller to woks with a rounded base. diameter base than the minimum given in the table.
  • Page 24: Tips On Saving Energy

    Tips on saving energy - Use a pan lid whenever possible to minimize heat loss. - Wide, shallow pans are preferable to tall, narrow ones. They will heat up faster. - Cook with as little water as possible. - Reduce the size of the flame once the water has come to the boil or the oil is hot enough to fry in.
  • Page 25: Operation

    Operation Flame goes out during operation  Risk of fire with overheated food.  If the flame goes out, for example Unattended food can overheat and because food has boiled over or if catch alight. there has been a sudden draught, Do not leave the hob unattended turn the control knob to „“.
  • Page 26: Adjusting The Flame

    Operation Adjusting the flame Switching off  Turn the rotary control clockwise to As the outer part of the flame is much  burner off. hotter than the centre, the tips of the flames should stay beneath the pan The gas supply is cut off and the flame base.
  • Page 27: Safety Features

    Safety features Thermo-electric flame failure monitor This wok has a thermo-electric flame failure monitor. If the flame goes out, for example because food has boiled over or if there has been a sudden draught, the supply of gas to the burner will be cut off.
  • Page 28: Cleaning And Care

    Cleaning and care Unsuitable cleaning agents  Danger of burning due to hot surfaces. To avoid damaging the surfaces of the The surfaces will be hot after appliance, do not use: cooking. - cleaning agents containing soda, Switch the wok off. alkalines, ammonia, acids or Allow the surfaces to cool down chlorides...
  • Page 29: Cleaning The Stainless Steel Trough

    Cleaning and care Cleaning the stainless steel Allow the ProLine element to cool trough down before cleaning.   Clean the ProLine element and Risk of damage by pointed accessories after each use. objects. The seal between the hob and the ...
  • Page 30: Cleaning The Rotary Controls

    Cleaning and care Cleaning the rotary controls Cleaning the wok ring/ combination trivet  Clean the rotary control(s) using a solution of warm water and a little  Clean the wok ring/combination trivet washing-up liquid applied with a soft in a dishwasher or with a solution of sponge.
  • Page 31: Cleaning The Burners

    Cleaning and care Cleaning the burners The ignitor must not get wet, otherwise it will not spark. Cleaning the burners  Finally dry everything thoroughly with Do not clean any parts of the burners a clean cloth. Make sure that the in a dishwasher.
  • Page 32: Assembling The Burners

    Cleaning and care Assembling the burners  The burners cannot function correctly if they are incorrectly  Place burner head  on to burner assembled. This can lead to damage base  so that the thermocouple  to the appliance and injury. and the ignitor  extend through their respective holes in the burner Ensure that all parts of the burner are reassembled in the correct order.
  • Page 33 Cleaning and care Functional check  Ignite all burners to check that they are burning correctly: - The flame must not go out on the lowest setting, or when the control is turned quickly from the highest to the lowest setting. - On the highest setting, the flame must have a distinctive and visible core.
  • Page 34: Problem Solving Guide

    Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it.
  • Page 35 The mains fuse has tripped. burner does not spark.  You may need to contact a registered electrical worker or Miele. There is food residue stuck between the ignitor and the burner cap. There is food residue on the thermocouple.
  • Page 36: Optional Accessories

    These products can be ordered through the Miele Webshop. Removes heavy soiling, limescale deposits and aluminium residues They can also be ordered from Miele (see end of this booklet for contact Microfibre cloth details) or from your Miele dealer. Removes finger marks and light soiling...
  • Page 37: After Sales Service

    You can book a Miele Customer Service Department call-out online at Contact information for the Miele Customer Service Department can be found at the end of this document. Please quote the model identifier and serial number of your appliance (Fabr./SN/ Nr.) when contacting the Miele Customer Service Department.
  • Page 38: Installation

    *INSTALLATION* Installation Safety instructions for installation  Risk of damage from incorrect connection. Incorrect installation can cause damage to the ProLine element. The ProLine element must only be installed by a qualified person.  Damage from falling objects. Take care not to damage the ProLine element when fitting wall units or a cooker hood above it.
  • Page 39: Safety Distances

    *INSTALLATION* Installation Safety Distance below the appliance Safety distances There should be at least 30 mm height Safety distance above the CombiSet or plenty of space reserved below the appliance for the installation of the flexible gas connection pipe and electrical cable. It also avoids any possible hindrance towards the movement of all moveable kitchen parts (e.g.
  • Page 40 *INSTALLATION* Installation Safety distances to the sides and back of the appliance Ideally the ProLine element should be installed with plenty of space on either side. The minimum safety distance  shown below must be maintained between the back of the ProLine element and a tall unit or wall.
  • Page 41 *INSTALLATION* Installation Safety distance to niche cladding If niche cladding is installed, a minimum safety distance must be maintained between the worktop cut-out and the cladding, since high temperatures can alter or damage these materials. If the niche cladding is made from a combustible material (e.g. wood), a minimum safety distance ...
  • Page 42: Installation Notes

    *INSTALLATION* Installation Tiled worktop Installation notes Sealing between the ProLine Element and the worktop Grout lines  and the hatched area underneath the ProLine element frame must be smooth and even. If they are not, the ProLine element will not sit flush with the worktop and the sealing ...
  • Page 43: Building-In Dimensions

    *INSTALLATION* Installation Building-in dimensions All dimensions are given in mm. a Spring clamps b Front c Casing depth d Casing depth for mains connection box with mains connection cable Mains connection cable L = 1,440 mm e Casing depth for gas connection R ½"...
  • Page 44: Worktop Cut-Out For Several Proline Elements

    *INSTALLATION* Installation Worktop cut-out for several ProLine elements Example: 3 ProLine elements a Spring clamps b Spacer bars c Gap between spacer bars and worktop d Cover e ProLine element width minus 8 mm f ProLine element width g ProLine element width minus 8 mm h Worktop cut-out...
  • Page 45 *INSTALLATION* Installation Calculating the worktop cut-out The frames of the ProLine elements overlap the worktop at the outside right and left by 8 mm on each side.  Add up the widths of the ProLine elements and subtract 16 mm from this figure. Example: 288 mm + 288 mm + 380 mm = 956 mm - 16 mm = 940 mm The ProLine elements are 288 mm, 380 mm or 576 mm wide depending on the...
  • Page 46: Installation

    *INSTALLATION* Installation Securing the spring clamps and Installation spacer bars – wooden worktops Preparing the worktop  Make the worktop cut-out as shown in “Installation dimensions” or as calculated (see “Installation – Installing several ProLine elements”). Remember to maintain the minimum safety distances (see “Installation –...
  • Page 47 *INSTALLATION* Installation Securing the spring clamps and spacer bars – granite and marble worktops You will need heavy-duty double-sided tape (not supplied) to secure the spring clamps or spacer bars.  Apply silicone to the side and lower edges of the spring clamps  or spacer bars .
  • Page 48 *INSTALLATION* Installation Fitting the ProLine element Installing several ProLine elements  Feed the mains connection cable  Push the built-in ProLine element to down through the worktop cut-out. the side until the holes in the spacer bar can be seen. ...
  • Page 49 *INSTALLATION* Installation Connecting the ProLine element Removing a ProLine element  Connect the ProLine element/  If the ProLine element is accessible elements to the electricity supply and from below, push it upwards to to the gas supply (see “Installation – remove it.
  • Page 50: Gas Connection

    *INSTALLATION* Installation Gas connection Connection to the gas supply must be carried out in strict accordance  According to the Gas Safety with current local regulations. Every (Registration of Gas Installers and appliance should have its own easily Gas Contractors) Regulations, any accessible isolating valve and test gas installation work including the point.
  • Page 51 Depending on country, a set of jets for conversion to an alternative type of gas may be included with the hob. Please contact your supplier or Miele for the appropriate conversion jets if necessary. Conversion to another type of gas is described under „Conversion to another type of gas“.
  • Page 52 *INSTALLATION* Installation Gas Governor LP Gas Connection - elbow joint connection The gas governor is only included with appliances set up for connection to Town gas. a Elbow join b Gasket a Connection to the hob c Nozzle b Outlet pressure (10 mbar) d Ring c Gas Governor e Rubber hose...
  • Page 53: Burner Ratings

    *INSTALLATION* Installation Burner ratings Nominal ratings Gas type Highest setting Lowest setting Natural gas – 0.25 Liquefied Petroleum gas Town gas – Nominal ratings CS 1018 G Gas type Highest setting Lowest setting Natural gas – 0.25 Liquid gas Town gas –...
  • Page 54: Electrical Connection

    If the mains connection cable is damaged, it must only be replaced with a specific mains connection cable of the same type (available from the Miele Customer Service Department). For safety reasons, such replacement may only be carried out by a qualified specialist or the Miele Customer Service Department.
  • Page 55: Converting To Another Gas Type

    *INSTALLATION* Converting to another gas type Changing the jets  Risk of explosion due to an incorrect conversion.  Disconnect the hob from the If the conversion to another type of electricity supply and turn off the gas gas is carried out incorrectly, it may supply.
  • Page 56 *INSTALLATION* Converting to another gas type Changing the outer burner main jet Checking the first intake of air a Adjustment screw  Use an open spanner (SW 10) to b Air intake sleeve rotate the main jet anti-clockwise out Gap X must measure: of the jet holder.
  • Page 57 *INSTALLATION* Converting to another gas type Changing the inner burner main jet Changing the small jets a Small jet with smaller diameter (e.g. for liquid gas: 0.23) d Small jet plate (main jet for inner b Small jet with larger diameter burner) (e.g.
  • Page 58: Functional Check

    *INSTALLATION* Converting to another gas type Functional check  Check all gas fittings for leaks.  Reassemble the hob.  Ignite all burners to check that they are operating correctly. - The flame must not go out on the lowest setting, or when the control is turned quickly from the highest to the lowest setting.
  • Page 59 Singapore: Miele Pte. Ltd. 29 Media Circle #11-04 ALICE@Mediapolis Singapore 138565 Tel: +65-67351191 Fax: +65-67351161 E-Mail: Internet: South Africa: Miele (Pty) Ltd 63 Peter Place, Bryanston 2194 P.O. Box 69434, Bryanston 2021 Tel.: (011) 875 9000, Fax: (011) 875 9035 Internet:
  • Page 60 CS 1018 en-SG, ZA M.-Nr. 10 829 920 / 03...

Table of Contents