Miele SmartLine CS 7611 Operating And Installation Instructions page 42

Problem solving guide
Problem
The sensor controls
show increased
sensitivity or fail to
react.
 flashes alternately
with  in the timer
display and a tone is
sounding.
1 and a number, e.g. 1-0
flash alternately with a 3
digit number in the
timer display.
42
Possible cause and remedy
The sensitivity level of the sensor controls has
changed.
 Make sure that there is no direct light (from the sun
or from an artificial source) falling onto the
SmartLine appliance. Also ensure the area
surrounding the SmartLine appliance is not too
dark.
 Take any pans off the SmartLine appliance and
wipe away any food deposits.
Ensure that there is nothing covering the entire
SmartLine appliance or sensor controls.
 Interrupt the power supply to the SmartLine
appliance for approx. 1 minute.
 If the problem persists after power is restored,
please contact Miele.
The SmartLine appliance is connected incorrectly.
 Disconnect the SmartLine appliance from the
mains.
 Contact Miele.
Cooking zone fault
 Interrupt the power supply to the SmartLine
appliance for approx. 1 minute.
 If the problem persists after power is restored,
please contact Miele.