Programming - Miele SmartLine CS 7611 Operating And Installation Instructions

You can adapt the programming of the
SmartLine appliance to your personal
needs. Several settings can be altered
in succession.
After accessing the programming
mode, the  symbol lights up and 
appears in the timer display. After a few
seconds : (Programme 01) will flash
alternately with : (Code) in the timer
display.
Changing the programming
Calling up programming mode
 With the SmartLine appliance
switched off, press and hold the 
and  sensor controls together until
the  symbol lights up and 
appears in the timer display.
Setting a programme
For a two-digit programme number
you need to first set the tens position.
 Touch the  sensor control
repeatedly until the programme
number you want appears in the
display, or touch the appropriate
number on the numerical keybank.
Setting the code
 Touch the  sensor control
repeatedly until the code number you
want appears in the display, or touch
the appropriate number on the
numerical keybank.
How to save the settings
 While the programme is visible in the
display (e.g. :), touch the
 sensor control until the indicators
go out.
How to avoid saving the settings
 Touch the  sensor until the
indicators go out.

Programming

35