Miele SmartLine CS 7611 Operating And Installation Instructions page 39


Risk of damage by pointed
objects.
The seal between the SmartLine
appliance and the worktop could
suffer damage.
Do not use pointed objects for
cleaning.
Do not use washing-up liquid to
clean the appliance. Using washing-
up liquid will not remove all soiling
and residues.
Cleaning with washing-up liquid can
result in an invisible film that can lead
to discolouration of the ceramic
glass. This discolouration cannot be
removed.
Clean the ceramic surface regularly
with a proprietary ceramic glass
cleaning agent.
 Remove any coarse soiling with a
damp cloth and more stubborn
soiling with a glass scraper.
 Then clean the ceramic glass surface
with the Miele ceramic and stainless
steel cooktop cleaner (see "Optional
accessories") or with a proprietary
ceramic glass cleaner applied with
kitchen paper or a clean cloth. Do not
apply the cleaner while the cooktop is
still hot, as this can result in marking.
Please follow the cleaning agent
manufacturer's instructions.
 Finally wipe the cooktop with a damp
cloth and dry it with a soft, dry cloth.
Cleaning and care
Residues can burn onto the cooktop
the next time it is used and cause
damage to the glass ceramic surface.
Ensure that all cleaner residues are
removed.
 Spots caused by limescale, water
and aluminium residues (spots with a
metallic appearance) can be removed
using the Miele ceramic and stainless
steel cooktop cleaner.

Risk of burning due to hot
surfaces.
The surfaces get hot during use.
Wear oven gloves when removing
residues of sugar, plastic or
aluminium foil from a hot cooktop
with a glass scraper.
 Should any sugar, plastic or
aluminium foil spill or fall onto a hot
cooking zone while it is in use, first
switch off the appliance.
 Then carefully scrape off these
residues immediately whilst they are
still hot, using a shielded scraper
blade suitable for use on glass.
 Afterwards, clean the glass ceramic
surface in its cooled state, as
described above.
39