Safety Switch-Off - Miele SmartLine CS 7611 Operating And Installation Instructions

Safety switch-off

Sensor controls are covered
Your SmartLine appliance will turn off
automatically if one or several of the
sensor controls remain covered for
longer than 10 seconds, for example,
by finger contact, food boiling over, or
by an object such as an oven glove or a
tea towel.  flashes briefly above the
 sensor control and a tone will sound.
If you remove the obstruction and/or
clean the appliance,  will go out and
the SmartLine appliance is ready for
use again.
Excessive operating time
The safety switch-off mechanism is
triggered automatically if the wok is
heated for an unusually long period of
time. This time depends on the power
level selected. Once exceeded, the heat
switches off and the residual heat
indicator appears. The wok can now be
used again as normal.
The SmartLine appliance is
programmed to safety setting 0 at the
factory. If required, you can set a
higher safety setting with a shorter
maximum operating time (see chart).
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the
number are only available if the power level
range has been extended (see "Power level
range").
** Factory default setting
Safety features
Maximum operating time
[h:min]
Safety setting
0** 1
10:00 8:00
10:00 7:00
5:00 4:00
5:00 3:30
4:00 2:00
4:00 1:30
4:00 1:00 00:30
4:00 00:42 00:24
4:00 00:30 00:20
4:00 00:30 00:18
1:00 00:24 00:10
2
5:00
4:00
3:00
2:00
1:30
1:00
33