Safety Features; System Lock / Safety Lock - Miele SmartLine CS 7611 Operating And Installation Instructions

System lock / Safety lock

The safety lock is deactivated if there
is an interruption to the power
supply.
Your SmartLine appliance is equipped
with a system lock and a safety lock to
prevent the appliance from being
switched on or any settings being
altered by mistake.
The system lock is activated while the
SmartLine appliance is switched off. If
the system lock is activated, the
appliance cannot be switched on and
the timer cannot be used. A set minute
minder time continues to count down.
The SmartLine appliance is
programmed so that the system lock
must be activated manually. It can be
programmed to be activated
automatically 5 minutes after the
SmartLine appliance has been switched
off (see "Programming").
The safety lock is activated while the
SmartLine appliance is switched on.
When the safety lock is activated, the
appliance can be operated only in a
limited way:
– Selected power levels cannot be
changed.
– A set minute minder time can be
modified.
– The SmartLine appliance can only be
switched off.
If an unavailable sensor control is
touched whilst the system lock or
safety lock is activated,  will appear
in the timer display for a few seconds
and a tone will sound.
Activating the system lock
 Touch the  sensor for 6 seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed  will appear in the
timer display. The system lock has been
activated.
Deactivating the system lock
 Touch the  sensor for 6 seconds.
 will appear briefly in the timer
display and then the seconds will count
down. The system lock is deactivated
once the time has elapsed.

Safety features

31