How To Set The Unit; Main Function - ACME Solaris CM-S6 User Manual

POWER
DMX
2. Display: To show the various menus and the selected function.
3. Button:
MENU
UP
DOWN
ENTER
4. DMX input:
DMX512 link, use 5-pin XLR cable to link the unit and DMX controller
5. DMX input:
DMX512 link, use 3-pin XLR cable to link the unit and DMX controller
6. DMX output:
DMX512 link, use 5-pin XLR cable to link the next unit
7. DMX output:
DMX512 link, use 3-pin XLR cable to link the next unit
8. ETHERNET:
Transfers fixture's information to a main controller
9. Power in: To connect to the mains supply
10. Power out: Connects to the next unit
11. Fuse (T 15A): Protect the unit from damage of over current.

4. How To Set The Unit

4.1 Main Function

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until the
required function is shown on the monitor. Select the function by the ENTER button. Use the
UP/DOWN button to choose the submenu, press the ENTER button to store and automatically return
to the last menu. Press the MENU button or let the unit idle one minute to exit menu mode.
In the event of disconnecting with mains power, press the UP button for one minute to enter into
menu mode. Press MENU button or let the unit idle one minute to exit.
The main functions are shown below（the grayed boxes are preset settings）:
On Power on
On DMX input present
To enter into move backward or leave the menu
To go backward to move up in the menu
To go to move down in the menu
To perform the desired functions
5F