ACME Solaris CM-S6 User Manual page 12

Automatic Test
Select Automatic Test, press the ENTER button to confirm, the unit will run built-in programs to
automatically test pan, tilt, dimmer, pattern, and so on. Press the MENU button back to the last
menu or exit menu mode after auto test.
Fixture Information
Enter menu mode, select Fixture Information, press the ENTER button to confirm, use the
UP/DOWN button to select LED Temperatue, Power on hours, LED on hours or Sofatware
Version.
LED Temperature
Select LED Temperature, press the ENTER button to confirm, temperature of the unit will show on
the display, press the MENU button to exit.
Power on hours
Select Fixture use hour, press the ENTER button to confirm, fixture use time will show on the
display, press the MENU button to exit.
Software Version
Select Software Version, press the ENTER button to confirm, firmware version will show on the
display, press the MENU button back to exit.
Reset Functions
All Reset
Select All Reset, press the ENTER button to confirm, use the UP/DOWN button to select Yes (the
unit will run built-in program to reset all motors to their home positions) or No, press ENTER
button to store. Press the MENU button to exit.
Special Functions
Factory Settings
Select Factory Settings, press the ENTER button to confirm, use the UP/DOWN button to select
Yes (the fixture will reset to factory settings) or No (normal), press ENTER button to store. Press
the MENU button to exit.
11F