ACME Solaris CM-S6 User Manual page 8

DMX Setting
To select DMX Settings press the ENTER button to confirm, use the UP/DOWN button to select
Channel Mode, Art-Net Setup or Port A DMX Address.
Channel Mode
To select Channel Mode, press the ENTER button to confirm. Use the UP/DOWN button to select
166 CH, 206 CH, 22+144CH or 21 CH channels mode, press the ENTER button to store. Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Are-Net Setup
To select Are-Net Setup, press the ENTER button to confirm. Use the UP/DOWN button to select
Ethernet IP Setup or Art-Net Port Setup, press the ENTER button to store. When choose Ethernet
IP Setup, use the UP/DOWN button to select IP Address or Subnet Mask. When choose Art-Net
Port Setup, use the UP/DOWN button to select Net, Subnet or Universe. Press the MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
Port A DMX Address
To select Port A DMX Address, press the ENTER button to confirm. Use the UP/DOWN button to
adjust the address from 001 to 512, press the ENTER button to store. Press the MENU button back
to the last menu or let the unit idle one minute to exit menu mode.
Fixture Settings
To select Fixture Settings, press the ENTER button to confirm, use the UP/DOWN button to select
DMX Last State, Dimmer Speed, Pan Inverse, Tile Inverse or P/T Feedback.
DMX Last State
To select DMX Last State, press the ENTER button to confirm. Use the UP/DOWN button to select
Blackout (fixture blacks out if DMX signal stops) or Hold (fixture continues to obey the last
command it received Via DMX if DMX signal stops), press the ENTER button to store. Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Dimmer Speed
To select Dimmer Speed, press the ENTER button to confirm. Use the UP/DOWN button to select
Fast or Smooth, press the ENTER button to store. Press the MENU button back to the last menu or
let the unit idle one minute to exit menu mode.
7F