Table of Contents
Advertisement
W i n d o w s
P C
S o f t w a r e
PAG E 3 0
E T I
D e c o d e r
7.5.1
Submenu Com Port
If the message PC not connected
port under the submenu Configuration -> COM Port and change the set-
tings. Factory settings are: 19200 Baud and Parity None.
FIG. 13
7.5.2
Submenu System Configuration
7.5.2.1
Configuration of the Line interface
FIG. 14
The page Line Interface allows the configuration of the 2-Mbit/s interface.
As reference clock you should normally select Recovered Clock. This setting
generates the clock from the incoming 2-Mbit signal.
Alternatively you can use the setting External Clock, if you have connected
an external clock to the clock input. The setting Internal Clock is only for test
purposes. In this case the clock is generated by the system.
1 If the connection is faulty try 9600 Baud and Parity Odd.
1
appears, please check the selected COM
COM PORT KONFIGURATION
CONFIGURATION OF THE LINE INTERFACE
Advertisement
Table of Contents
