Replacing The Print Roller - CAB XD4M/300 Service Manual

3 Replacing Assembly Units
10
3.4

Replacing the Print Roller

Fig.5 Removing the side plate
Fig.6 Removing and installing rollers
Dismount side plates
1. Turn lever (1) counterclockwise and/or Lever
(2) counterclockwise, to swing the printhead
from the print roller away.
2. Remove labels and transfer ribbon from the
printer.
 Operator's Manual
1
3. Loosen screws (3) on plate (4 / 5) with Allen
3
key.
4
4. Remove the plate (4 / 5).
5
3
2
Removing and installing Rollers
1. Pull print roller (6) and/or (7) from the shafts
on the housing.
2. Clean shafts of the roller  expanded view.
1
3. Slide print roller (6) and/or (7) onto their
respective shafts and turn slightly until the
hexagon of the shaft engages in the hexagon
socket of the print roller.
4. Set plate (4/5) in place and tighten screws (3)
with Allen key.
2
6 7 5 3 4 3
10