Table of Contents
Advertisement
Fig. 2.5
000 The procedure for checking a defective
battery is completed at this point.
Battery
model:
Turn the power OFF.
the screws and remove the battery cover.
the battery mounted in the holder.
Put the new battery in the holder and set the
connector.
Poor connection will not cause conduction.
matter.
See Fig. 2.6.
CORRECT
for
Battery
NC memory
Battery Layout (9" AMGC NC Rack 3)
ER6V3 Supply code BA507
Use a screwdriver to remove
The direction of the connector does not
CORRECT
Fig. 2.6
Battery Connection
Bettery elerm
encoder
Remove
WRONG
65
Advertisement
Table of Contents
Troubleshooting
