2.3 CONTROL PANEL
This section explains YASKAWAIS standard
cabinet. For cabinets customized for customers,
refer to the manual issued by machine
manufacturer.
(1)
( a )
( b )
60
Checks for Tight Closing
(daily)
of Doors
The control panal is con-
structed as a dust-proof,
sheet-steel enclosure with
gasketed doors so as to
keep out dust and oil mists.
Keep each door tightly
closed at all times.
After inspecting the con-
trol with the door open,
close the door and fasten
door locks (two per door)
securely using the key
provided (No. YEOO1) .
When opening or closing,
insert the key all the way
into the keyhole and turn
until it clicks (approximately
a quarter-turn) .
can be removed from an
open or closed position.
CLOSED
OPEN POSITION
Left - Hand Hinged Door
Movable part "a " is notched horizontally, . . . . . . closed
Movable part "a " is notched vertically. . . . . . . Opn
If the optional door interlocking switch is
provided, opening the door shuts off the
main power supply and stops all operations.
Fig. 2.2
D O O R
The key
OPEN POSITION
Right-Hand Hinged Door
Door Lock
o
o