Table of Contents
Advertisement
2.5 B A T T E R Y
C h e c k i n g
B a t t e r y
Make sure that "BAT" is not
displayed on the lower right
portion of the CRT screen at
power ON.
the battery must be replaced
within a month.
No commercially available
batteries can be used.
When replacing the battery,
be sure to contact your
YASKAWA representative.
<Replacing Procedure>
Depress the POWER OFF
o
If a door interlock switch is
provided, turn it
power can be turned
with the door open.
Open the door so that the
NC rack (model:
is visible.
Turn power ON.
Check if the LED on the
model JANCD-FC200, model JANCD-
FC300B and model JANCD-FC400
boards goes ON.
If the battery must be replaced,
the LED goes ON.
If it is displayed,
pushbutton.
OFF. The
ON,
C T O R
YASNAC
BAT
63
Advertisement
Table of Contents
Troubleshooting
