Sunrise Medical QUICKIE Q100R General Manual page 49

The controller and the attendant steering
1. Switch on the controller (A in Fig. 12.8)
2. To activate the attendant steering the user/attendant switch
needs to be pressed (A in Fig. 12.9)
3. Press on the 'mode' button (B) to select the 'adjustment options'
mode. The controller will now be in the 'adjustment options'
mode. It is possible to follow the status on the display screen.
The joystick or the push handles (C) are used to select and operate the
electric adjustment options.
4. Move the joystick / handles to the left or the right to select the
desired adjustment option. The actuator LED's indicates the
currently selected seating function.
5. Moving the joystick forwards / backwards or the handles up /
down will activate the selected electric adjustment option (see
table on next page). Move the joystick / handles until the desired
adjustment option has been attained.
Move joystick backwards / Pushing the push
Adjustment handles down
Tilt The entire chair will tilt backwards
Backrest The backrest will tilt backwards
Legrest The legrest angle will increase, the footplate
will be raised
Move joystick forwards / Lifting the push
Adjustment handles up
Tilt The entire chair will tilt forwards
Backrest The backrest will tilt forwards
Legrest
The legrest angle will decrease, the footplate
will be lowered
6. Press on the 'mode' button to return to the 'drive' mode.
A
B
MODE PROFILE
C
B
MODE
C
Q100R-Q200R Configured Rev. A
Fig. 12.8
Fig. 12.9
A
49