Pre-Set Swing Away Legrests - Sunrise Medical QUICKIE Q100R General Manual

9.3 Pre-set swing away legrests

Legrest width (Fig 9.5)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
Lower leg length (Fig 9.6)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
NOTE / CAUTION!
Ensure that there is sufficient free space under (B) for the
wheelchair to drive over obstacles.
Ankle angle (Fig 9.7)
1. Loosen (A) a few turns.
2. Adjust (B) to the desired position.
3. Tighten (A).
Knee angle manual/power elevating legrest (Fig 9.8)
The position of the footplates can be changed by adjusting the
knee angle.
1. Loosen (A) a few turns.
2. Adjust (B) to the desired position.
3. Tighten (A).
DANGER! / WARNING!
Risk of trapping fingers! When moving the legrest up or down,
do not put your fingers in the adjusting mechanism between
the moving parts of the legrest.
NOTE / CAUTION!
Change the height or knee angle if the footplate touches the
castor wheels.
Calf pad height (Fig 9.9)
1. Loosen (A) a few turns.
2. Adjust (D) to the desired position.
3. Tighten (A).
Calf pad depth (Fig 9.9)
4. Loosen (B) a few turns
5. Adjust (D) to the desired position.
6. Tighten (B).
Calf pad width (Fig 9.9)
7. Loosen (C) on the back of (D) a few turns.
8. Adjust (D) to the desired position.
9. Tighten (C).
2
A
B
A
2
B
2
B
M5
1
M5
3
B
A 1 3
D
2
5
B 4 6
Q100R-Q200R Configured Rev. A
Fig. 9.5
1 M5
3 M5
Fig. 9.6
M5
1
M5
3
Fig. 9.7
A
1 3
Fig. 9.8
2
A
Fig. 9.9
7 9
C
8
35