Assembly:; Armrest; Anti-Tip Wheels - Sunrise Medical QUICKIE Q100R General Manual

7.0 Assembly:

7.1. Footrest (Fig. 7.0.1-7.0.3):
The Q100R-Q200R is supplied with three models of Swing
away footrest.
The footrests can be swung away by pulling the release lever
back towards the seat and pushing the hanger outwards. To
remove the footrest, activate the release lever, rotate the
footrest approximately 90° outwards and then pull it out
upwards. To refit the footrest follow the reverse procedure
and the lock engages automatically when swung inward.
Fig. 7.0.1 Fig. 7.0.2
Q100R
26
Q100R-Q200R Configured Rev. A
Fig. 7.0.3
Q200R Q200R
Fig. 7.1
7.2. Armrest (Fig. 7.2):
Slide the armrest tube into the receiver of the wheelchair and
turn the lever to the right to secure it. If you require a different
individually fixed armrest height, you can set this using the
adjusting screw on the connecting tube.
Fig. 7.2
7.3. Anti-tip wheels (Fig.7.3):
These are mounted when the wheelchair leaves the factory.
The anti-tip wheel tube is welded to the main chassis of the
wheelchair frame.
Note: Anti-tips wheels may interfere with kerbs when mounting
or dismounting. Follow the instructions in sections 6.9 & 6.10.
WARNING!
Never use the wheelchair without the anti-tip wheels fitted.
Fig. 7.3